How do i connect my PC or Laptop?

Submitted by Peter on Thu, 2010-04-08 13:11

Answer:  The Visualiser has 2 x VGA input sockets and 2 x VGA output sockets on the back, If you want to view your PC image and have the ability to see captured images from the Visualiser follow the wiring directions below:
1. Plug the vga cable supplied with Visulaiser into your PC and then into Visualiser Input VGA 1.
2. Plug a second VGA cable (usually supplied with projector, see note below) into output VGA 1 and into either your monitor or the socket on the wall which connects up to your projector.
3. Plug the USB cable supplied with the Visualiser into the PC / Laptop and into your Visualiser.
You have now completed the wiring of your visualiser for viewing your PC.

 
Note:
a) You may have purchased an Interactive board or Projector from another company, if this projector was installed and you have a wall panel which you plug your PC or Laptop into, it is at stage 2 above you will plug this VGA cable connecting your laptop to the wall panel, into the Visualiser Output 1. 
b) Imex Visualiser's are fully compatible with all Interactive whiteboards, and the vast majority of Projectors.  So please be assured that there is not any current issues that would inhibit the use of our Visualiser.